Updated 15 August 2026
The whole appeal of a Samsung Frame TV is that it can pass for a piece of art instead of a black rectangle on the wall. That illusion falls apart fast if the TV sits an inch off the wall with a shadow gap behind it, or if a tangle of cables and a beige box are sitting in plain view underneath. Getting the “framed art” look right is really a hardware problem: the right wall mount, a plan for the One Connect box, and a way to hide the cable running up to the TV. Here is how to pick each piece, plus real product picks for every part of the job.
The picks at a glance
| Best for | Product | Price | Link |
|---|---|---|---|
| True no-gap look (Samsung’s own) | Samsung Slim Fit Wall Mount | $$$ · Premium | View |
| Budget no-gap mount | Ultra Slim Micro-Gap Mount | $$ · Mid-range | View |
| Full-motion / adjustable | monTEK Ultra Slim Full Motion Mount | $$ · Mid-range | View |
| No drilling into studs | No-Stud, No-Drill Wall Mount | $ · Budget | View |
| One Connect box | Frame TV Connect Box Wall Mount | $ · Budget | View |
| Hiding cables in the wall | ECHOGEAR In-Wall Cable Kit | $$ · Mid-range | View |
The reviews
Price: $$$ · Premium
This is Samsung’s own mount, built for the Frame TV’s exact VESA pattern and cable channel, so it sits closer to the wall than a generic bracket usually manages. It is the safest bet if the no-gap look is the entire point of buying a Frame TV in the first place.
Pros: purpose-built for the Frame TV, blends in since it is a genuine Samsung accessory, holds the set close enough to read as a framed piece.
Cons: priced like a premium accessory, and the fit is model-specific so you need to match it to your exact Frame TV size.
Skip it if: you have an older or non-Frame Samsung TV, or you would rather save money and accept a slightly larger gap.
See price on Amazon →
Price: $$ · Mid-range
A third-party fixed mount that gets the TV close to the wall for well under Samsung’s own mount price, with a wide size range and all the hardware included in the box.
Pros: noticeably cheaper than Samsung’s own mount, fits a broad range of TV sizes, simple fixed installation.
Cons: no tilt or swivel once it is up, and a third-party bracket cannot promise quite the same flush fit as Samsung’s own hardware.
Skip it if: you want any tilt or swivel adjustment after installation.
See price on Amazon →
Price: $$ · Mid-range
For rooms where glare or seating means the TV needs to angle a bit, this stays slim while adding extend, tilt, and swivel movement, so you are not locked into one fixed position.
Pros: full range of motion for glare and seating angles, still a low profile when pushed flat against the wall.
Cons: the moving arm adds some depth compared with a fixed no-gap mount, and there are more parts to line up during installation.
Skip it if: a perfectly flush, zero-movement look matters more to you than being able to angle the screen.
See price on Amazon →
Price: $ · Budget
Built for drywall without needing to find a stud, which matters in rentals or older homes where the studs do not line up where you want the TV. It is the easiest option to install without power tools.
Pros: no stud-finding or drilling into structural framing, straightforward for renters, no power tools required.
Cons: rated for lighter TVs and needs solid, undamaged drywall, so it is not meant for the largest Frame TV sizes.
Skip it if: your Frame TV is 65 inches or larger, or you are not confident about your wall’s condition.
See price on Amazon →
Price: $ · Budget
The One Connect box is the piece people forget about. This bracket holds it against the wall, out of sight and off the floor, so it is not sitting next to the TV stand in plain view.
Pros: purpose-made for the One Connect box, keeps it off the floor, tidies up the single cable running to the TV.
Cons: it is a second bracket to install and a cable to route, so it adds a small extra step to the setup.
Skip it if: you are happy leaving the One Connect box inside a media console or drawer instead.
See price on Amazon →
Price: $$ · Mid-range
This is how you get the fully invisible look: the power and low-voltage cable both run inside the wall instead of down the surface, and the kit includes the hole saw attachment needed to cut the openings.
Pros: nothing visible on the wall at all once it is installed, includes the hardware needed to cut the openings cleanly.
Cons: it means cutting into drywall, which some renters and cautious buyers will want an electrician to handle.
Skip it if: you are renting and cannot modify the wall, or you would rather use a surface cord cover instead.
See price on Amazon →
What to look for before you buy
Flush mount vs. slim-fit vs. full-motion
A “no-gap” or “slim-fit” mount holds the TV as close to the wall as the cable connector allows, which is what gives the art-frame look. A full-motion mount adds an arm so the screen can extend, tilt, or swivel, which is useful if you need to angle the TV for glare or an off-center seating area, but it always sits a bit further off the wall than a fixed slim mount. Decide which matters more in your room before you buy: the closest possible fit, or the ability to move the screen later.
Measure before you buy
Check your TV’s exact model number and VESA mount pattern (the spacing between the screw holes on the back) against the mount’s listed compatibility, not just the screen size. Samsung’s own Slim Fit mounts are sized to specific Frame TV ranges, and generic mounts list a size and weight range, so confirm both before ordering.
What to do about the One Connect box
The One Connect box carries every input and the power connection, linked to the TV by a single cable, which is what makes the flush look possible in the first place. Most people either mount the box behind furniture, tuck it in a drawer or console, or use a dedicated wall bracket to hold it flat against the wall near the TV or behind a piece of furniture, out of sight.
Hiding the cable
You have two realistic options: an in-wall cable management kit that routes the cord behind the drywall, or a surface-mounted cord cover that you paint to match the wall. The in-wall kit gives the cleanest result but involves cutting two holes in the drywall, so it suits a permanent installation more than a rental. A cord cover is fully reversible and takes minutes to install, at the cost of a thin painted channel being faintly visible up close.
Frequently asked questions
Does a Frame TV need a special wall mount?
Not strictly, but a generic mount usually leaves a visible gap and doesn’t route the single connector cable as cleanly. A slim-fit or no-gap mount, whether Samsung’s own or a compatible third-party one, is what gets you the flush look the Frame TV is designed for.
Can I mount a Frame TV without drilling into a stud?
Yes, for smaller and lighter Frame TV sizes there are no-stud, no-drill mounts rated for solid drywall. For larger sizes, a stud-mounted bracket is the safer choice given the added weight.
What do I do with the One Connect box?
Tuck it into a media console or drawer, sit it behind furniture, or use a dedicated wall bracket to hold it flat against the wall near the TV so it is not left sitting out on the floor.
Is it safe to run the TV’s power cable inside the wall?
Standard household extension cords are not rated for in-wall use. Purpose-built in-wall cable management kits use UL-listed, in-wall rated cable and a recessed outlet, which is the safe way to do this rather than fishing a regular power cord through the wall cavity.
How much gap is normal behind a Frame TV?
With a proper slim-fit or no-gap mount, the TV should sit close enough to the wall that the shadow gap is barely noticeable from a normal viewing distance. A standard tilting or fixed mount not designed for the Frame TV will usually leave a much more visible gap.
How we chose
Every product above was pulled from real Amazon listings researched through Amazon product data (not hand-picked or invented), covering three separate jobs: mounting the screen flush, mounting the One Connect box, and hiding the cable. We favored a genuine Samsung accessory for the top pick because it is purpose-built for the Frame TV’s own cable channel, then picked well-reviewed alternatives for each budget and use case, including renters who cannot drill into studs. We skipped a large in-wall structured wiring enclosure aimed at whole-home theater installs, since it is more hardware than a single TV setup needs.
As an Amazon Associate we earn from qualifying purchases. Product availability and pricing shown on Amazon are always current there, so check the live listing before buying.
This site is reader-supported and may earn a commission on qualifying bookings or purchases made through our links, including as an Amazon Associate. Prices and availability shown by our partners are always current on their own site; check the live listing before buying.